Get a Free Quote

custom & signature pieces

Custom Stone Furniture

A dining table, a coffee table or a console can be made in stone, sized to your room and to the way it will be used. Each piece is cut from a slab you choose.

About Custom Stone Furniture

Stone furniture starts the same way as a countertop: a slab is chosen, cut to size and finished at the edges. The difference is that a table or console stands on its own, often at the centre of a room, where its surface is seen from all around. Some pieces are stone throughout. Others are a stone top on a separate base, and the two are planned together.

Each material behaves differently, so the choice follows the use. Sealed granite and true quartzite stand up well to everyday meals. Marble is softer and etches where wine, citrus or vinegar sit on it; a honed finish makes those dull marks less noticeable than a polish does. Quartz holds a consistent colour, but hot dishes need a trivet, and long hours of direct sun can discolour some quartz. Porcelain and sintered stone resist heat and fading well, though a hard knock can chip an edge.

Size and weight shape the design. A large top needs the right thickness and a base strong enough to hold it, and it must fit through doors and stairways in one piece or be planned with a joint. We suggest a thickness, edge profile and finish for the way the piece will be used. A polished top catches the light, while a honed one has a quieter, matte look.

At a Glance

Ideal for
  • Dining and living rooms
  • Entryways and hallways
  • Restaurants, lobbies and offices
Timeline
Set by the size, stone and detail of the piece; your quote gives the expected timing.
Materials
  • Granite
  • Quartz
  • Quartzite
  • Marble
  • Porcelain / sintered stone
Compare materials

the benefits

Key Benefits

  • Made to Your Measurements

    Size, shape and thickness are set by your room and what the piece needs to do.

  • One of a Kind

    No two natural slabs are identical, so a granite, marble or quartzite table has markings found nowhere else.

  • Clean Lines, Close Joints

    CNC cutting keeps edges straight, profiles even and mitred corners tight on every stone part.

  • Stone Suited to Its Use

    We help match stone to use, so a busy dining table and a hallway console each get a suitable surface.

how it works

The Process

  1. 01 .

    Describe the piece

    Tell us what it is, the size you have in mind and where it will stand.

  2. 02 .

    Select stone and finish

    Pick a slab in our warehouse, then settle the edge profile and finish with us.

  3. 03 .

    Cut to size

    The top and any stone base are cut and edged to the agreed size in our shop.

  4. 04 .

    Set in place

    Our installers set the piece in place, level it and check every joint.

questions

Common Questions

All questions
What kinds of furniture can you make in stone?

We make dining, coffee and side tables, consoles and other pieces built around a stone top or stone panels. For something less usual, send a sketch or a photo of a similar piece, and we will tell you whether it works in stone and what it would need.

What care does a stone table need?

Wipe it with a soft cloth and mild soapy water, or a pH-neutral stone cleaner. Avoid abrasive pads, bleach and vinegar. Coasters, placemats and trivets help prevent rings, scratches and heat marks. Granite, marble and quartzite may need resealing now and then; quartz, porcelain and sintered stone do not. Ask us about yours.

Can stone furniture stay outside through an Ottawa winter?

Some materials can. Porcelain and sintered stone rated for outdoor use handle sun and frost well, and dense, sealed granite also does well outside. Most quartz is meant for indoor use, because sunlight can discolour its resin. Marble weathers outdoors and gradually loses its polish. Describe where it will stand, and we will suggest a stone that suits the spot.

free quote

Get a Free Quote

Tell us about your project and we'll be in touch within 24 hours. Every quote is free and backed by our best‑price guarantee.

613-983-0663

All fields are required.

Rough measurements, materials you like, timing — anything that helps.

explore

Other Services

All services

Custom & Signature Pieces

Idea to Life Projects

Curved bars, waterfall features and other custom concepts, fabricated to your design.

Countertops & Surfaces

Granite Countertops

Natural stone with a pattern no other slab shares, cut and finished for kitchens that work hard.